The TC line for minerals consists of process additives specially adapted for the grinding of a wide range of industrial minerals, increasing the overall performance of the grinding plant together with the dispersion and fluidity of mineral powders in the circuit.
Tecnochem’s LPC Line for Mineral Production Processes represents a wide range of high performance Liquid Processing Chemicals, also known as Grinding Aids for both fine and superfine powders. Tecnochem’s LPC Line is composed of particularly formulated organic substances. When added to the grinding plant at very low dosages, they allow increases in production, depending on the grinding capacity of the mineral, the fineness that must be achieved and the characteristics of the particular grinding process. In addition, the particle size distribution, flowability and quality of the finished material obtained are considerably improved. Tecnochem has achieved extensive and specialized experience both in the very fine grinding of Calcium Carbonate and in the production processes of a large number of different minerals. Each Tecnochem LPC formulation is selected according to the characteristics of the mineral to be ground and refined; the formulation selection also takes into consideration the final application of the mineral produced. Strict rules on health and safety make the latter a key factor, which is supported by ISEGA conformity certificates.
The final determination of the most suitable and technically and economically efficient Tecnochem LPC formulation must always be completed with industrial tests in the plant.
Also known as Grinding Aids for grinding cement clinker and secondary constituents.
The TC line for minerals consists of process additives specially adapted for the grinding of a wide range of industrial minerals, increasing the overall performance of the grinding plant together with the dispersion and fluidity of mineral powders in the circuit.
The Tecnochem TC Line includes a wide range of high performance Liquid Processing Chemicals, also known as Cement Grinding Aids.
Liquid Processing Chemicals are organic formulated.
They are added to the grinding plant at very low dosages.
Tecnochem LPC allow significant increases in production of the grinding plant, between 5% and 30%, depending on the grindability of the clinker and the amount of additions of secondary constituents, as well as the characteristics of the particular production process.
The fluidity and quality of the finished material are considerably improved.
Tecnochem also develops several ad hoc formulations of Liquid Processing Chemicals. These formulations are specially adapted to each particular cement, to each technical requirement of the producer and to the production targets. Once the target has been identified and the components of the cement recipe pass through laboratory tests, the most suitable and performing LPC is selected on the basis of the results of these laboratory tests. Further optimizations of LPC Tecnochem are possible. This can only be achieved after industrial tests in the cement plant.
The Tecnochem QC Line includes both traditional and new generation Tecnochem Liquid Processing Chemicals for the grinding of cement clinker and secondary constituents.
These formulations allow a combined effect both as Grinding Aid and Quality Conditioner Effect.
These formulations allow an increase in the percentage quantity of secondary constituents with maintenance or improvement of mechanical strength.
NanoMinerals and NanoCones functionalized for high technology and avangurdy applications.
“Multiscale Molecular Modelling”